Using Lightburn For Laser Cutting And Laser Engraving – Settings And Parameters – Endurancelasers

Using Lightburn for Laser Cutting

When you Jasa Laser Cutting Medan get your laser all set up and ready for cutting, the next question is how to convert your design into gcode the machine can understand. There are many different programs available that can achieve this task, but today we’re taking a look at Lightburn. At $40 for the g-code version, Lightburn is priced quite reasonably, considering how many features it offers.Overview of Lightburn

To get you started as fast as possible with Lightburn, let’s take a look around the interface. (1) In the middle, you can see a representation of the work area that you have Jasa Laser Cutting Medan defined for your laser. This is where you put your design and can arrange everything. (2) On the left of the screen is the toolbar for making your design right in Lightburn. You can create lines, shapes, text, and then you can combine multiple shapes into one or subtract them from each other. You also can create patterns if you need multiples of an object. (tiga) Above the work area, you have the properties of the object that is selected. Here you can adjust things like size, font, and more. (4) Above that, you have some more tools like opening, saving, copying, zooming on the left, and some tools to help with the alignment of the different objects on the right.Lightburn Layers

When we move to the right of the screen (lima), we can see the overview of all the layers. A layer in Lightburn is a collection of shapes that all have the same engraving or cutting settings. By separating your design into multiple layers, you can engrave and cut with different settings right in the same arsip. To change the layer an object is on, select it first, and then choose one of the colors (6) on the bottom of the screen. Below the listed layers, you have a short overview of the laser parameters for the selected layer, and by double-clicking on the layer, you can open a more detailed window.

If you have your laser connected directly to your computer, you can control it in the other tabs (7) that are available instead of the layer overview. In the bottom right of the interface (8), we find some more controls for the laser if one is connected to the computer, but also the button to export the gcode (9) to use it with a different controller. If we switch this panel over to the Library panel (10), we can save cut settings as profiles, that we then can apply to our design and save some time the next time we use the aplikasi.Some Tips

Once you get comfortable with the perangkat lunak and find that you want the panels arranged differently, you can also drag them to a different spot, or completely hide them from the “Window” sajian in the top bar. I, for example, like to have the Library visible at all times, so I dragged it to a different place.

Of course, you are not limited to drawing your designs inside of Lightburn, but you can also import many different formats, such as SVG, DXF, Adobe Illustrator files, or even images. When you import an image, you can either engrave it as a greyscale image or convert it to lines, if it is a logo or Jasa Laser Cutting something. The tools to do that are located in the “Tools” menu in the top bar. When engraving the image, you also have the possibility of choosing different methods. We have a dedicated article and video for that, that goes into much detail.

Another great tool available in the top bar is the preview. You can also reach it by pressing ALT+P on your keyboard. Inside, you get an estimate of the time it will take to complete the lasering, and you also get a graphical representation of exactly how the tool-paths will be.Exporting files

Before you can export the gcode you created, you do have to choose the controller your laser is using. Lightburn has profiles for Marlin, Smoothieware, Grbl, CanCam, FabKit, and Gerbil in the standard version. If you have a different controller, feel free to reach out to the Lightburn staff, and they can likely help you get everything set up.

I hope that this overview helped you to get started with Lightburn. Once you get the hang of it, it is quite fast to work with Lightburn, thanks to the Library and all the great tools. So now all that’s left to say is Happy lasering!BASIC LIGHTBURN FEATURES TO UNDERSTAND

Start making things for fun and business! Discount on the first order!

Diode laser cutting and engraving can be achieved with a good understanding of the perangkat lunak being used to get the most out of your machine. With the right settings, image preparation, and material preparation, it’s possible to achieve high precision and reliable operation. For this article, we will be using Lightburn aplikasi. Lightburn provides many options for laser engraving. Lightburn includes image modes for engraving including atkinson, jarvis, newsprint, ordered, stucki, dither, threshold, greyscale, sketch, halftone. In this article, we will demonstrate many features of Lightburn and provide tips for getting started.GETTING STARTED WITH LIGHUTBURN

When setting up for cutting or graving, you will want to note the type of material when setting the speed and power of the laser. With any laser used for cutting, the thicker the material, the more repeated passes will be required.

The settings on your machine should be properly set so that it does not compromise on precision and ruin your project because of an avoidable error.WORK AREA

The bed size on Lightburn should match the parameters of your machine. This will be important for homing and using the maximum space. Inside Lightburn’s grid, a green dot can be found. The green dot on Lightburn’s work area is where the origin can start from. The position can start at user origin, current position, or absolute coordinates.

The job origin can help to customize additional start points of the subject. This job origin has been set to the top left.FRAME

The frame feature will give you a preview of whether or not your material will fit the cut inside the laser bed. Click frame: Frame can be done to get a preview of the area used for the engraving or cutting. The frame can be useful for all projects on Lightburn. Frame by holding shift and frame at the same time click either frame square or circle type of frame.

With offsetting you can create an inward, outward, or both with an offset and have the inner or outer layer selected separately. This is useful if you would like to engrave the inner part of the offset and then select the outer layer to use as a cut line to make a unique design.

To change the layer of objects select the object and click on one of the layers located on the bottom 00-29 that you would like your object to be on. The color will represent the layer. The layers shown will be able to individually do separate commands for the final image. In the cut/layers panel you can set the specific instructions that your machine runs when it commences.

An image can be adjusted further with Lightburn’s inbuilt photo editor. An advantage of using Lightburn’s editor is the live picture comparison to adjust the image and avoid problems in engraving.

To find the image editor just right-click on your image, then click on adjust the image.ENGRAVING IN LIGHTBURN:

You can get started on a project right away with a selected file loaded with custom settings and materials in Lightburn. Lightburn will support the following extensions .ai .pdf .sc .dxf .hpgl .plt .rd .svg .jpg .jpeg .png .gif .tif .tiff .tga .scpro2 .lbrn .lbrn2 .bmp

A clear result can be achieved with proper power and speed and image adjustments.

A preferable type of image used are, high contrast quality, defined edges, little to no noise.

As you can see from the image below, the inbuilt Lightburn editor has many tools for image Layer settings, image modes, Image settings.

The before and after show adjustments, in increased contrast, reduced brightness, and greyscale image mode. The improvements include the smoothness, more details can be seen and the overall quality of the picture has been improved.

The quality of the image you intend to use makes a great difference. To create a clear final image a high-definition photo can help achieve a great result. Otherwise, time will be spent bringing up the image quality.

Image options that save time include vector files. Once loaded, you can use the trace feature in Lightburn and select individual elements to a group, and ungroup together to make needed adjustments.CUT TOOLS AND FEATURES:

Lightburn has several useful inbuilt cutting tools. Once you’ve selected and loaded your arsip for laser cutting. When lasers are cutting patterns, diodes typically can go through thin materials such as wood or acrylic.

Once you have loaded your image, you then make sure your image arsip is aligned.

Leave a Reply

Your email address will not be published.